Turbo Polyblade with Embedded Plate: The Turbo Polyblade has been modified to impart a more aggressive dispersing action. Replaceable high shear pegs without steel studs are molded or fabricated into the blade. Customer trials have reported the ability to disperse higher viscosities, higher solids, faster grind time and lower amp draw though not necessarily all in the same application. The blade has 3 or more pegs on each side. The blade is available in the same materials as the standard Polyblade starting at 3” diameter and larger.
The Polyurethane Polyblade is now available with an embedded dynamically balanced steel plate. Stiffening Plates are not required with this blade. Blade assembly is far easier which is especially important in confined space entries. The center area is counter bored down to a thin skin so that it sits flat against the shaft.
The major benefits are:
Faster grind time
Efficient dispersing of high viscosity products
Lower amp draw.
Turbo Polyblade with Embedded Plate
Specifications: 100% organic
thermoset Durometer: 70D-75D core and 65A-95A exterior Softening
temperature: 180 degrees F Sizes: 1/4"-36" diameter Solvent
sensitive: see chart
UHMW Polyethylene Specifications:
100% organic thermoplastic Durometer: 60D-65D Softening temperature:
160 degrees F Carbon impregnated for anti-static Sizes: 2"
- 30" diameter Chemical resistant: see chart8
Anti-Static UHMW Impeller
Blade with counter-sunk center to accommodate
stiffening plates where necessary.Click photo for larger view.
blades can be drilled for any type of shaft mounting.
For proper operation we will need
Center bore measurement
Pin hole diameter and bolt circle
Hp orKw of disperser
Diameter of tank
Length of shaft portion for mounting
blade (distance under shoulder)